Tag Archives: cooking machine

Oil Mill Press Price Groundnut Oil Machine Press Oil Cooking Oil Making Machine Press Oil Refinery

Oil Mill Press Price Groundnut Oil Machine Press Oil Cooking Oil Making Machine Press Oil Refinery

oil mill press value groundnut oil machine push oil cooking oil making device push Oil Refinery

Rationalization:
one) CZPTizer It really is utilized for ridding off acid, degumming.
two) Decolorizer It truly is employed for ridding off/minimizing the coloration of the oil.
3) Deodorizer It’s employed for ridding off odor of the oil.
4) Transfer oil furence It truly is utilised giving for the heats necessary to the line, it could make the temperature up to 280 levels.
5) Air pressurer Blow to dry the Clay for decoloring.
6) Oil filter Distinct the oil decolorized.
seven) Steam producer Producing steams of higher temperater for deodorizer.

1) CZPTizing
There is 2 approaches according to incorporating diverse quantity alikali and diverse oil temperature.
One particular is weak alkali(ten-sixteen Be) and higher oil temperature (seventy five degrees), who is only used for weak color and minimal acidity The other is low temperature(twenty levels orso ) and density alkali(20 Be orso), whose is used a lot more.
A) Lower temperature(twenty degrees orso ) and density alkali(twenty Be orso)
Adjust the tempetature of oil to 20-30degrees, then put alkali drinking water of 20-30 Be into oil inside of 5-ten mins, mixing and increase temperate for twenty- 60 minutes. When the temperature of oil increase to sixty levels orso, to cease adding heats and immobility for 6-eight hrs to out of the cleaning soap particle.
B) Weak alkali(ten-sixteen Be) and substantial oil temperature (seventy five degrees) (Omission)
C) Washing by water
After be out of the soap paticle from the beneath of refiner, then continustly including the heats to 90degrees, then add some hot water to washing the oil, observe the temperature of water is increased for five-10degrees than oil temperature. Then mixing them for five minutes, then immobility for 4 hrs, place off the cleaning soap drinking water, so for 2-three times which is confirmed as the oil quality.
Oil washed is extra heat to 105 levels orso, to blend then dehydrate for one hour, also immediately is pumped into decolorizer vessel for dry for thirty minutes in the vacuum condition.

two) Decolorizer
Pump the oil netralized into decolorizer vessel, samely mixing to increase its temperature to ninety levels, then mixing for 30 minutes, to minimize water to .1%, then set a minor clay (decoloring media) 2
four % of complete oil, mixing for thirty minutes, to reduce the temperature to 70 levels, then filte the clay with oil filter, to get the oil decolorized.

3) Deodorizer
Pump the oil decolorized into deodorizer vessel in 755mmHg of vacuum, 240 degrees-260degrees, to distillate for 4hrs wit steams. Then flip off the steams to open the cooler to minimize the temperature to 40-80 levels, then examine a minor oil, if okay to pack it.
 

5-20t Factory cost crude oil refinery processing  edible  oil refinery plant

 one.Compendium

Use rational refiner technology, a little investment decision, straightforward operation. In accordance to the good quality of cake, change technological parameter, numerous sorts of oil quality can bu made.
two.Scope and raw material
Scope:5T/D Palm Oil Refinery Line 
Raw substance:

Acid(HOKmmg/g) :< 15.0
Impurity(%) :≤ 2.
Humidity and volatile(%) :≤2.
3. Prepare: Finished oil comply the Chinese CZPT
four.CZPT concentrate on
CZPTtric intake:< 24 kw·h/t oil 
Cycle H2o use: < 15m3/t oil
Comfortable h2o :< 180kg/t oil
 Accessory consumption:Clay < 3%, phosphoric acid <0.2%
Refiner usage
L%=one- refining yield% has relation with high quality of impolite oil and acid value.
five.Description of the Method.
Flowchart

 

5.2. Description of main Method
The crude palm oil has significantly less hydratable & non-hydratable phosphoric acid and high FFA. So the line is adopted the actual physical refining method, which is not only significantly far more affordable and effective than chemical refining, but also leads to no air pollution via squander h2o and exhaust air.

Degumming and Pre-bleaching Section:
Special Degumming Part
Eliminate solubility impurity in the crude oil is degumming process. Due to the fact phosphoric acid is principal portion of solubility impurity in the crude oil. In sector, degumming also is named to get rid of phosphoric acid. Just before distilling approach for bodily refinery, take away solubility impurity is a extremely crucial phase, it can minimize loss in the oil, boost oil high quality.
The Crude oil filtered is pumped out from the Buffer Tank. Passing via dosing program, the oil enters into the Warmth Exchanger to be Heated up to developed temperature 60ºC. Then go into the mixer vessel for mixing with the the phosphoric aced added by means of the metering Pump. The mixture circulation into the acid reacting vessel for reacting for 15-20mins. 
Then different the gums and oil through a single centrifuge. Oil is exchanging warmth to 70 levels and circulation into the pre-bleaching process.
Knowledge: 
Phosphoric acid (eighty-85%) .05 – .two% of crude oil
Doing work time < 20mins
Steam < 100kg/t crude oil 

Pre-Decolorizer Method 
the oil degummed is pumped into the decolorizer, samely open up the vacuum system to increase its temperature to remove off the moisture to begin with. 
The clay dosed flow into the mixing tank/clay and oil to begin with,, then inhaled into the decolorizer vessel with the vacuum situation, which mixing for 30mins or so underneath the a hundred and ten degrees and vacuum issue, soon after cooling(the decolorizer vessel has the h2o coil for cooling oil), the temperature to 70 degrees or so, which movement into the leaf filter for eliminate off the clay and oil go to the next procedure. 
Observe: This method could remove out forty% purple colour/carotenoids, the far more is removed out from the distilling process.
Knowledge: P < 5ppm,Fe ion < 0.1ppm, Cu < 0.01ppm
Distilling Procedure 
Pump the oil decolorized into the distilling vessel in the higher vacuum, and 240 levels -260degrees oil temperature, to distillate for 4hrs.
The FFA would be remove out with the immediate steam. 
The final oil is out soon after exchanging amongst hot oil distilled and oil decolorized.
Notice: This method is not only get rid of out the FFA, but also odor and most of pink color / Sizzling sensitive decolorization.

Fractionation of oils and fat Process 
Dry fractionation of oils and fats is the separation of high-melting triglycerides from lower-melting triglycerides by crystallization from the soften. Apart from mixing, it is the cheapest process in oils and fat processing. It is a pure physical procedure in contrast to other chemical modification processes this sort of as hydrogenation and interesterification which modify triglycerides. Dry fractionation is now utilized to many sorts of fats: palm oil, anhydrous milk unwanted fat, tallow, fish oil, lard, cottonseed oil, sunflower seed oil, palm kernel oil, tallow butter fat, and particular fats.

The most important apps are: palm olein used extensively as frying oil, palm tremendous olein as salad oil and frying oil, the palm-mid fraction as ingredient of cocoa butter equal, palm kernel stearin as cocoa butter substitute, anhydrous milk excess fat fractions for bakery and confectionery items, spreadable butter, tallow olein for frying oil and spreads. In this method, the unwanted fat is melted and heated to eliminate any crystal memory. The molten unwanted fat is cooled down beneath managed agitation and cooling situations to make crystals nuclei shaped by the higher melting triglycerides. Then, nuclei will increase to form crystals of the wanted size. When the crystallisation has progressed far sufficient, the slurry is separated. 
The last oil could be divided into 18degrees, 24degrees, 33degrees in accordance to melting levels.
Transmit scorching oil CZPT
The furnace is an natural and organic CZPT heating furnace with typical liquid oil for the medium the gasoline could be coal and diesel oil, waste oil. The scorching temperature oil pump forcedly convey the hot oil recycle into the utilizing program, comprehend to transmit the heats indirectly from the furnace to using method. 
The important is that the furnace is not substantial pressure boiler, to decrease the inspecting cost every yr.

Main Data: 

The power of Supporting Heat

Working 

Temperature

Working 

Force

Valve of Pipe

Coal/wood 

Use

Heat 

Performance

three*ten5kcal/h

≤340ºC

≤1MPa

80mm

69.5/100kg/h

≥70%

Vacuum Pump System

Steam and h2o jet vacuum pump program for distilling system.

Product

Max Strain

Capability

H2o Pump

Steam Stress

Steam Consumption

Recycling CZPT Drinking water Needed

QSWJ-40

3mmHg

40m3/h

4kw

.3MPa

35kg/h

two.8t/h


Main Assignments Scope:

—–30-5000T/D cooking oil seeds pretreatment project
—–30-5000T/D cooking oil seeds extraction task
—–ten-500T/D crude cooking oil refining machine 
—- five-200T/D crude oil mill refinery machine 

—-ten-2000T/D edible oil refining machine 

—-one-200T/D mini cooking oil mill plant

Our Providers

CZPT & CZPT

 

Firm Info

ZheJiang Double CZPTs CZPTry I/E CO.,LTD

A professional collection of research ,style, production and sales of Oil producing machine,animal food equipment ,extruder device for pet and treats,and a lot of other kind of foodstuff machine.

Our company has a big manufacturing factory with 40 years rich experiences based on one CZPT machinery started by our government machinery department, we adopts advanced production technology, sophisticated equipment and have won abundant strength after many years of development accumulation. 

Our puffed machinery has won the 1999 best national evaluation,and passed the ISO 9001 CZPT CZPT Authentication in 2000.More proudly, we have achieved the CE certificate to convenient more CZPTean customers.

Buyer Vist



CE&ISO Certification

 

Oil Mill Press Price Groundnut Oil Machine Press Oil Cooking Oil Making Machine Press Oil Refinery

Cooking Cotton Seed Peanut Canola Sunflower Mustard Oil Refining Machine

Cooking Cotton Seed Peanut Canola Sunflower Mustard Oil Refining Machine

groundnut palm sunflower crude cooking edible oil refinery soybean oil solvent extraction machine  plant
Rationalization:
one) CZPTizer It is used for ridding off acid, degumming.
two) Decolorizer It really is utilized for ridding off/lowering the color of the oil.
three) Deodorizer It truly is used for ridding off odor of the oil.
four) Transfer oil furence It is utilised giving for the heats required to the line, it could make the temperature up to 280 levels.
5) Air pressurer Blow to dry the Clay for decoloring.
6) Oil filter Distinct the oil decolorized.
seven) Steam producer Generating steams of substantial temperater for deodorizer.

1) CZPTizing
There is two approaches according to incorporating various quantity alikali and various oil temperature.
One is weak alkali(10-16 Be) and substantial oil temperature (75 levels), who is only utilized for weak color and lower acidity The other is minimal temperature(20 levels orso ) and density alkali(twenty Be orso), whose is utilised more.
A) Low temperature(twenty levels orso ) and density alkali(20 Be orso)
Change the tempetature of oil to twenty-30degrees, then place alkali h2o of twenty-30 Be into oil inside of five-10 mins, mixing and increase temperate for 20- sixty mins. When the temperature of oil rise to sixty degrees orso, to cease including heats and immobility for six-eight hrs to out of the soap particle.
B) Weak alkali(ten-sixteen Be) and higher oil temperature (seventy five degrees) (Omission)
C) Washing by drinking water
After be out of the cleaning soap paticle from the underneath of refiner, then continustly adding the heats to 90degrees, then incorporate some scorching h2o to washing the oil, be aware the temperature of drinking water is increased for 5-10degrees than oil temperature. Then mixing them for 5 minutes, then immobility for four hrs, put off the soap water, so for two-3 moments which is confirmed as the oil good quality.
Oil washed is extra warmth to a hundred and five levels orso, to combine then dehydrate for one hour, also directly is pumped into decolorizer vessel for dry for thirty mins in the vacuum condition.

2) Decolorizer
Pump the oil netralized into decolorizer vessel, samely mixing to increase its temperature to 90 degrees, then mixing for 30 minutes, to minimize drinking water to .one%, then put a minor clay (decoloring media) two
4 % of overall oil, mixing for thirty minutes, to minimize the temperature to 70 degrees, then filte the clay with oil filter, to get the oil decolorized.

three) Deodorizer
Pump the oil decolorized into deodorizer vessel in 755mmHg of vacuum, 240 degrees-260degrees, to distillate for 4hrs wit steams. Then turn off the steams to open up the cooler to decrease the temperature to 40-eighty degrees, then examine a tiny oil, if okay to pack it.
 

5-20t Manufacturing facility price crude oil refinery processing  edible  oil refinery plant

 one.Compendium

Use rational refiner technologies, a tiny investment, straightforward procedure. According to the quality of cake, adjust technological parameter, several kinds of oil grade can bu produced.
2.Scope and raw substance
Scope:5T/D Palm Oil Refinery Line 
Uncooked materials:

Acid(HOKmmg/g) :< 15.0
Impurity(%) :≤ 2.
Humidity and unstable(%) :≤2.
3. Plan: Finished oil comply the Chinese CZPT
four.CZPT focus on
CZPTtric usage:< 24 kw·h/t oil 
Cycle H2o use: < 15m3/t oil
Delicate h2o :< 180kg/t oil
 Accessory consumption:Clay < 3%, phosphoric acid <0.2%
Refiner use
L%=1- refining produce% has relation with top quality of impolite oil and acid price.
5.Description of the Approach.
Flowchart

 

five.2. Description of main Approach
The crude palm oil has considerably less hydratable & non-hydratable phosphoric acid and high FFA. So the line is adopted the physical refining approach, which is not only much more economical and effective than chemical refining, but also causes no air pollution via squander drinking water and exhaust air.

Degumming and Pre-bleaching Segment:
Unique Degumming Segment
Remove solubility impurity in the crude oil is degumming approach. Simply because phosphoric acid is primary part of solubility impurity in the crude oil. In business, degumming also is named to get rid of phosphoric acid. Just before distilling process for actual physical refinery, eliminate solubility impurity is a extremely important stage, it can reduce loss in the oil, boost oil top quality.
The Crude oil filtered is pumped out from the Buffer Tank. Passing by way of dosing program, the oil enters into the Warmth Exchanger to be Heated up to created temperature 60ºC. Then go into the mixer vessel for mixing with the the phosphoric aced additional via the metering Pump. The mixture movement into the acid reacting vessel for reacting for 15-20mins. 
Then individual the gums and oil via one particular centrifuge. Oil is exchanging heat to 70 degrees and flow into the pre-bleaching method.
Knowledge: 
Phosphoric acid (80-85%) .05 – .two% of crude oil
Functioning time < 20mins
Steam < 100kg/t crude oil 

Pre-Decolorizer Process 
the oil degummed is pumped into the decolorizer, samely open the vacuum system to increase its temperature to remove off the humidity to begin with. 
The clay dosed movement into the mixing tank/clay and oil first of all,, then inhaled into the decolorizer vessel with the vacuum problem, which mixing for 30mins or so below the 110 levels and vacuum problem, soon after cooling(the decolorizer vessel has the water coil for cooling oil), the temperature to 70 levels or so, which circulation into the leaf filter for get rid of off the clay and oil go to the next method. 
Note: This procedure could take away out forty% red shade/carotenoids, the a lot more is eliminated out from the distilling method.
Data: P < 5ppm,Fe ion < 0.1ppm, Cu < 0.01ppm
Distilling Approach 
Pump the oil decolorized into the distilling vessel in the higher vacuum, and 240 levels -260degrees oil temperature, to distillate for 4hrs.
The FFA would be get rid of out with the direct steam. 
The ultimate oil is out following exchanging among scorching oil distilled and oil decolorized.
Observe: This procedure is not only get rid of out the FFA, but also odor and most of pink shade / Very hot sensitive decolorization.

Fractionation of oils and fats Procedure 
Dry fractionation of oils and fat is the separation of higher-melting triglycerides from low-melting triglycerides by crystallization from the soften. Apart from blending, it is the cheapest approach in oils and fats processing. It is a pure actual physical approach when compared to other chemical modification processes these kinds of as hydrogenation and interesterification which modify triglycerides. Dry fractionation is now applied to numerous varieties of fat: palm oil, anhydrous milk body fat, tallow, fish oil, lard, cottonseed oil, sunflower seed oil, palm kernel oil, tallow butter fat, and particular fat.

The most critical apps are: palm olein employed thoroughly as frying oil, palm tremendous olein as salad oil and frying oil, the palm-mid portion as part of cocoa butter equivalent, palm kernel stearin as cocoa butter substitute, anhydrous milk body fat fractions for bakery and confectionery products, spreadable butter, tallow olein for frying oil and spreads. In this approach, the body fat is melted and heated to eradicate any crystal memory. The molten body fat is cooled down beneath controlled agitation and cooling problems to make crystals nuclei formed by the higher melting triglycerides. Then, nuclei will increase to kind crystals of the sought after size. When the crystallisation has progressed much adequate, the slurry is separated. 
The closing oil could be divided into 18degrees, 24degrees, 33degrees in accordance to melting degrees.
Transmit very hot oil CZPT
The furnace is an natural and organic CZPT heating furnace with standard liquid oil for the medium the gas could be coal and diesel oil, waste oil. The very hot temperature oil pump forcedly convey the sizzling oil recycle into the using program, understand to transmit the heats indirectly from the furnace to using program. 
The crucial is that the furnace is not higher pressure boiler, to lessen the inspecting value every year.

Main Data: 

The electricity of Supporting Heat

Working 

Temperature

Working 

Strain

Valve of Pipe

Coal/wood 

Use

Heat 

Efficiency

3*tenfivekcal/h

≤340ºC

≤1MPa

80mm

69.5/100kg/h

≥70%

Vacuum Pump System

Steam and drinking water jet vacuum pump technique for distilling method.

Product

Max Force

Ability

Water Pump

Steam Stress

Steam Usage

Recycling CZPT H2o Needed

QSWJ-forty

3mmHg

40mthree/h

4kw

.3MPa

35kg/h

two.8t/h


Primary Tasks Scope:

—–thirty-5000T/D cooking oil seeds pretreatment venture
—–thirty-5000T/D cooking oil seeds extraction project
—–ten-500T/D crude cooking oil refining machine 
—- 5-200T/D crude oil mill refinery machine 

—-ten-2000T/D edible oil refining machine 

—-one-200T/D mini cooking oil mill plant

Our Companies

CZPT & CZPT

 

Organization Info

ZheJiang Double CZPTs CZPTry I/E CO.,LTD

A professional collection of research ,design and style, production and sales of Oil generating equipment,animal foodstuff machine ,extruder machine for pet and snacks,and numerous other variety of foodstuff equipment.

Our company has a big manufacturing factory with 40 years rich experiences based on one CZPT machinery started by our government machinery department, we adopts advanced production technology, sophisticated equipment and have won abundant strength after many years of development accumulation. 

Our puffed machinery has won the 1999 best national evaluation,and passed the ISO 9001 CZPT CZPT Authentication in 2000.More proudly, we have achieved the CE certificate to convenient more CZPTean customers.

Customer Vist



CE&ISO Certification

Cooking Cotton Seed Peanut Canola Sunflower Mustard Oil Refining Machine

New Product Cooking Oil Filtration Machine

New Product Cooking Oil Filtration Machine

          

 

 

Application

It is applied to get better and purify different higher-precision oil these kinds of as cooking oil, vegetable oil, plant oil, hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil and so on

Attributes

  1. Sturdy functionality of breaking emulsification
  2. High vacuum dewatering and degassing
  3. More deeply and specifically FH rectangular filtering program
  4. CZPT’s special technologies with H.P.M high polymeric adsorbing content

Gain

  1. Right after the oil remedy by this machine, the oil drinking water material can down to at least 80ppm, gasoline material can down to less than .one%, particle dimension can down to 5um, make the oil can be utilised in the large precision device system.

Parameters Unit TYA-ten TYA-twenty TYA-30 TYA-50 TYA-100 TYA-one hundred fifty TYA-200 TYA-300
Movement rate L/min 10 twenty thirty fifty 100 150 200 three hundred
Vacuum diploma Mpa -.06 ~- .095
Working strain Mpa ≤0.four
Temperature diploma ºC ~one hundred
Functioning sounds dB(A) ≤75 ≤75 ≤75 ≤78 ≤78 ≤78 ≤80 ≤82
CZPTtric heating energy KW 36 40 forty five seventy two eighty 90 one hundred twenty 135
Overall electrical electrical power KW 38 forty two 47 seventy five 87 one hundred and one 135 147
Inlet (outlet) caliber mm Ф25 Ф25 Ф25 Ф32 Ф42 Ф50 Ф50 Ф60
Measurement mm 1500x1000x 1600 1500x1050x 1600 1500x1050x1650 1600x1150x1700 1750x1150x1750 1900x1600x1950 1950x1600x1950 2100x1600x2000
Excess weight Kg 350 380 four hundred 450 550 650 seven hundred 750
Viscosity index mm2/S GB443-89
Flash stage(open up cup) ºC GB443-89
Humidity % No (GB/T260)
System impurities % .05~.005(GB/T511)

Maintenance

  1. Right after a particular period of working, the machine should be checked to see no matter whether:
  2. The electrical management method is protected and reliable
  3. The temperature controller is sensitive, reliable and correct
  4. Oil seals of the pump shaft are broken with leakage
  5. There is any blockage with the working program and any abnormal sounds with pumps or related motors
  6. There is any air or oil leakage with the oil operating method and at sealing joints.
  7. Soon after every single 3000 hours’ running, grease shall be replenished to avoid motors from currently being burnt.
  8. Special vacuum pump oil or lubricating oil N46 must be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
  9. If the device will not be used above 1 month, Place the machine in a dry setting with the panel door and all valves shut, and the machine suitable secured by a covering.

Pre-sale Service

According to customer’s requires, we recommend the most appropriate machine with substantial value efficient.

Cost-free on-web site installation, debugging and complex training (presented by strictly educated technology software engineers)

Supply OEM support.

After-sale Support

We offer you the doorway-to-doorway after revenue support for set up and debugging.

The guarantee interval is 24 months from commissioning acceptance day on.

We develop instrument service profile for our consumers to document the product support and routine maintenance problems.

Organization Details
 

  1. We are the skilled company and exporter of oil purifier in China
  2. We are in this subject because 2003
  3. We are the thirteen-calendar year golden supplier on Alibaba
  4. We offer our clients skilled products at aggressive price
  5. We offer you our client reputable life span after-product sales provider

Packing and Shipping and delivery

Secure and Timely Transportation

Standard export picket case with high high quality cushioning content makes certain that the consumers get the merchandise in good problem.

Very carefully check out each packing detail prior to delivery to steer clear of any troubles throughout the transportation.

Appointed logistics firm could be utilized according to consumers needs.

Do our very best to make certain clients can get the merchandise in time.

Post by Sophie
 

New Product Cooking Oil Filtration Machine

Cooking Best Oil Press Machine Sunflower Oil Production Process Oil Seed Press Mini Crude Oil Refinery

Cooking Best Oil Press Machine Sunflower Oil Production Process Oil Seed Press Mini Crude Oil Refinery

cooking greatest oil push machine sunflower oil creation method oil seed push Mini Crude Oil Refinery

Product Description

one.Compendium

Use rational refiner technologies, a small investment, easy procedure. In accordance to the quality of cake, alter technological parameter, numerous types of oil quality can bu made.
2.Scope and raw substance
Scope:5T/D Palm Oil Refinery Line 
Raw material:

Acid(HOKmmg/g) :< 15.0
Impurity(%) :≤ two.
Moisture and risky(%) :≤2.
3. Prepare: Finished oil comply the Chinese CZPT
four.CZPT target
CZPTtric use:< 24 kw·h/t oil 
Cycle Water usage: < 15m3/t oil
Gentle water :< 180kg/t oil
 Accessory intake:Clay < 3%, phosphoric acid <0.2%
Refiner usage
L%=one- refining generate% has relation with good quality of impolite oil and acid value.
5.Description of the Approach.

5.two. Description of primary Process
The crude palm oil has less hydratable & non-hydratable phosphoric acid and substantial FFA. So the line is adopted the physical refining technique, which is not only much far more economical and efficient than chemical refining, but also causes no pollution via squander h2o and exhaust air.

Degumming and Pre-bleaching Segment:
Specific Degumming Part
Eliminate solubility impurity in the crude oil is degumming method. Due to the fact phosphoric acid is principal element of solubility impurity in the crude oil. In market, degumming also is named to get rid of phosphoric acid. Just before distilling method for bodily refinery, get rid of solubility impurity is a very essential step, it can minimize loss in the oil, improve oil top quality.
The Crude oil filtered is pumped out from the Buffer Tank. Passing via dosing method, the oil enters into the Heat Exchanger to be Heated up to developed temperature 60ºC. Then go into the mixer vessel for mixing with the the phosphoric aced extra via the metering Pump. The combination flow into the acid reacting vessel for reacting for 15-20mins. 
Then different the gums and oil via one centrifuge. Oil is exchanging heat to 70 degrees and circulation into the pre-bleaching process.
Data: 
Phosphoric acid (eighty-85%) .05 – .two% of crude oil
Working time < 20mins
Steam < 100kg/t crude oil 

Pre-Decolorizer Process 
the oil degummed is pumped into the decolorizer, samely open up the vacuum technique to rise its temperature to get rid of off the moisture to begin with. 
The clay dosed flow into the mixing tank/clay and oil to start with,, then inhaled into the decolorizer vessel with the vacuum situation, which mixing for 30mins or so beneath the 110 levels and vacuum problem, right after cooling(the decolorizer vessel has the drinking water coil for cooling oil), the temperature to 70 levels or so, which flow into the leaf filter for remove off the clay and oil go to the subsequent approach. 
Be aware: This procedure could get rid of out forty% purple colour/carotenoids, the much more is taken off out from the distilling approach.
Info: P < 5ppm,Fe ion < 0.1ppm, Cu < 0.01ppm
Distilling Procedure 
Pump the oil decolorized into the distilling vessel in the substantial vacuum, and 240 levels -260degrees oil temperature, to distillate for 4hrs.
The FFA would be take away out with the direct steam. 
The last oil is out after exchanging in between very hot oil distilled and oil decolorized.
Note: This process is not only get rid of out the FFA, but also odor and most of red colour / Hot delicate decolorization.

Fractionation of oils and fats Procedure 
Dry fractionation of oils and fat is the separation of high-melting triglycerides from minimal-melting triglycerides by crystallization from the melt. Aside from mixing, it is the least expensive process in oils and fat processing. It is a pure physical approach in comparison to other chemical modification processes this kind of as hydrogenation and interesterification which modify triglycerides. Dry fractionation is now used to numerous varieties of fat: palm oil, anhydrous milk body fat, tallow, fish oil, lard, cottonseed oil, sunflower seed oil, palm kernel oil, tallow butter fats, and special fats.

The most essential purposes are: palm olein used thoroughly as frying oil, palm super olein as salad oil and frying oil, the palm-mid fraction as element of cocoa butter equivalent, palm kernel stearin as cocoa butter substitute, anhydrous milk unwanted fat fractions for bakery and confectionery items, spreadable butter, tallow olein for frying oil and spreads. In this process, the excess fat is melted and heated to eliminate any crystal memory. The molten fat is cooled down underneath managed agitation and cooling problems to create crystals nuclei formed by the greater melting triglycerides. Then, nuclei will grow to type crystals of the sought after dimensions. When the crystallisation has progressed much sufficient, the slurry is divided. 
The final oil could be separated into 18degrees, 24degrees, 33degrees according to melting levels.
Transmit very hot oil CZPT
The furnace is an natural CZPT heating furnace with typical liquid oil for the medium the gas could be coal and diesel oil, squander oil. The hot temperature oil pump forcedly express the sizzling oil recycle into the utilizing technique, comprehend to transmit the heats indirectly from the furnace to using method. 
The crucial is that the furnace is not substantial pressure boiler, to lessen the inspecting cost every 12 months.

Main Data: 

The electricity of Supporting Heat

Working 

Temperature

Working Pressure

Valve of Pipe

Coal/wood 

Usage

Heat Efficiency

3*tenfivekcal/h

≤340ºC

≤1MPa

80mm

sixty nine.five/100kg/h

≥70%

Vacuum Pump System

Steam and h2o jet vacuum pump system for distilling program.

Product

Max Stress

Capacity

H2o Pump

Steam Stress

Steam Usage

Recycling CZPT Water Essential

QSWJ-40

3mmHg

40mthree/h

4kw

.3MPa

35kg/h

two.8t/h


Primary Initiatives Scope:

—–thirty-5000T/D cooking oil seeds pretreatment undertaking
—–thirty-5000T/D cooking oil seeds extraction undertaking
—–10-500T/D crude cooking oil refining machine 
—- five-200T/D crude oil mill refinery machine 

—-ten-2000T/D edible oil refining machine 

—-1-200T/D mini cooking oil mill plant

Our Companies

CZPT & CZPT

Company Information

ZheJiang Double CZPTs CZPTry I/E CO.,LTD

A professional collection of research ,layout, production and sales of Oil creating equipment,animal food machine ,extruder device for pet and snacks,and many other sort of meals device.

Our company has a big manufacturing factory with 40 years rich experiences based on one CZPT machinery started by our government machinery department, we adopts advanced production technology, sophisticated equipment and have won abundant strength after many years of development accumulation. 

Our puffed machinery has won the 1999 best national evaluation,and passed the ISO 9001 CZPT CZPT Authentication in 2000.More proudly, we have achieved the CE certificate to convenient more CZPTean customers.

Consumer Vist


CE&ISO Certification

Cooking Best Oil Press Machine Sunflower Oil Production Process Oil Seed Press Mini Crude Oil Refinery

Olive Crude Cooking Castor Batch Edible Oil Refinery Machine

Olive Crude Cooking Castor Batch Edible Oil Refinery Machine

olive crude cooking castor batch edible oil refinery device

Solution Description

one.Compendium

Use rational refiner technologies, a little expenditure, effortless operation. According to the quality of cake, adjust technological parameter, a lot of types of oil quality can bu developed.
2.Scope and raw material
Scope:5T/D Palm Oil Refinery Line 
Raw content:

Acid(HOKmmg/g) :< 15.0
Impurity(%) :≤ 2.
Humidity and risky(%) :≤2.
three. Program: Finished oil comply the Chinese CZPT
four.CZPT goal
CZPTtric use:< 24 kw·h/t oil 
Cycle H2o usage: < 15m3/t oil
Delicate water :< 180kg/t oil
 Accessory intake:Clay < 3%, phosphoric acid <0.2%
Refiner consumption
L%=one- refining produce% has relation with top quality of rude oil and acid benefit.
five.Description of the Approach.

five.2. Description of major Approach
The crude palm oil has less hydratable & non-hydratable phosphoric acid and higher FFA. So the line is adopted the actual physical refining method, which is not only considerably much more economical and successful than chemical refining, but also causes no air pollution via squander water and exhaust air.

Degumming and Pre-bleaching Area:
Special Degumming Part
Get rid of solubility impurity in the crude oil is degumming approach. Simply because phosphoric acid is major element of solubility impurity in the crude oil. In business, degumming also is named to get rid of phosphoric acid. Ahead of distilling procedure for bodily refinery, take away solubility impurity is a quite essential action, it can minimize reduction in the oil, enhance oil top quality.
The Crude oil filtered is pumped out from the Buffer Tank. Passing by means of dosing method, the oil enters into the Warmth Exchanger to be Heated up to made temperature 60ºC. Then go into the mixer vessel for mixing with the the phosphoric aced included through the metering Pump. The combination flow into the acid reacting vessel for reacting for 15-20mins. 
Then independent the gums and oil via a single centrifuge. Oil is exchanging heat to 70 degrees and flow into the pre-bleaching approach.
Knowledge: 
Phosphoric acid (80-85%) .05 – .2% of crude oil
Operating time < 20mins
Steam < 100kg/t crude oil 

Pre-Decolorizer Method 
the oil degummed is pumped into the decolorizer, samely open the vacuum technique to rise its temperature to get rid of off the moisture to start with. 
The clay dosed circulation into the mixing tank/clay and oil first of all,, then inhaled into the decolorizer vessel with the vacuum problem, which mixing for 30mins or so under the 110 levels and vacuum problem, after cooling(the decolorizer vessel has the water coil for cooling oil), the temperature to 70 degrees or so, which movement into the leaf filter for eliminate off the clay and oil go to the subsequent method. 
Observe: This approach could take away out forty% pink coloration/carotenoids, the a lot more is eliminated out from the distilling approach.
Knowledge: P < 5ppm,Fe ion < 0.1ppm, Cu < 0.01ppm
Distilling Procedure 
Pump the oil decolorized into the distilling vessel in the high vacuum, and 240 levels -260degrees oil temperature, to distillate for 4hrs.
The FFA would be get rid of out with the direct steam. 
The last oil is out soon after exchanging among very hot oil distilled and oil decolorized.
Notice: This method is not only remove out the FFA, but also odor and most of crimson coloration / Sizzling sensitive decolorization.

Fractionation of oils and fat Method 
Dry fractionation of oils and fats is the separation of substantial-melting triglycerides from reduced-melting triglycerides by crystallization from the melt. Apart from blending, it is the most affordable process in oils and fats processing. It is a pure actual physical procedure compared to other chemical modification processes this sort of as hydrogenation and interesterification which modify triglycerides. Dry fractionation is now used to several kinds of fat: palm oil, anhydrous milk unwanted fat, tallow, fish oil, lard, cottonseed oil, sunflower seed oil, palm kernel oil, tallow butter fat, and special fat.

The most critical applications are: palm olein utilized extensively as frying oil, palm tremendous olein as salad oil and frying oil, the palm-mid fraction as component of cocoa butter equal, palm kernel stearin as cocoa butter substitute, anhydrous milk excess fat fractions for bakery and confectionery merchandise, spreadable butter, tallow olein for frying oil and spreads. In this procedure, the excess fat is melted and heated to eliminate any crystal memory. The molten unwanted fat is cooled down beneath managed agitation and cooling circumstances to create crystals nuclei fashioned by the higher melting triglycerides. Then, nuclei will develop to kind crystals of the desired dimension. When the crystallisation has progressed much ample, the slurry is divided. 
The last oil could be divided into 18degrees, 24degrees, 33degrees in accordance to melting degrees.
Transmit very hot oil CZPT
The furnace is an natural and organic CZPT heating furnace with typical liquid oil for the medium the gasoline could be coal and diesel oil, squander oil. The hot temperature oil pump forcedly convey the sizzling oil recycle into the utilizing technique, realize to transmit the heats indirectly from the furnace to making use of technique. 
The essential is that the furnace is not large strain boiler, to minimize the inspecting value each 12 months.

Main Data: 

The power of Supporting Heat

Working 

Temperature

Working Pressure

Valve of Pipe

Coal/wood 

Consumption

Heat Efficiency

3*tenfivekcal/h

≤340ºC

≤1MPa

80mm

sixty nine.five/100kg/h

≥70%

Vacuum Pump System

Steam and h2o jet vacuum pump system for distilling system.

Design

Max Strain

Capacity

Drinking water Pump

Steam Pressure

Steam Consumption

Recycling CZPT Drinking water Needed

QSWJ-forty

3mmHg

40mthree/h

4kw

.3MPa

35kg/h

2.8t/h


Primary Assignments Scope:

—–thirty-5000T/D cooking oil seeds pretreatment undertaking
—–30-5000T/D cooking oil seeds extraction undertaking
—–10-500T/D crude cooking oil refining machine 
—- 5-200T/D crude oil mill refinery machine 

—-ten-2000T/D edible oil refining machine 

—-one-200T/D mini cooking oil mill plant

Our Companies

CZPT & CZPT

Organization Information

ZheJiang Double CZPTs CZPTry I/E CO.,LTD

A professional collection of research ,style, production and sales of Oil creating device,animal foods device ,extruder equipment for pet and treats,and several other kind of meals device.

Our company has a big manufacturing factory with 40 years rich experiences based on one CZPT machinery started by our government machinery department, we adopts advanced production technology, sophisticated equipment and have won abundant strength after many years of development accumulation. 

Our puffed machinery has won the 1999 best national evaluation,and passed the ISO 9001 CZPT CZPT Authentication in 2000.More proudly, we have achieved the CE certificate to convenient more CZPTean customers.

Consumer Vist


CE&ISO Certification

Olive Crude Cooking Castor Batch Edible Oil Refinery Machine

Hot Selling Edible Cooking Oil Filling Capping Machine

Hot Selling Edible Cooking Oil Filling Capping Machine

Sizzling Selling Edible Cooking Oil Filling Capping CZPT

Description
Our computerized sauce filling equipment is appropriate for car space-temp or large-temp bottling of various liquid, sauce, paste & cream, broadly employed in foodstuff, beverages & pharmaceutics, & cosmetcis fields.

Qualities:
1.With SUS304/SUS316 injection piston pump filling, it is convenient to change filling dosage accurately, with higher filling precision. 
2. Content getting in touch with components are outfitted with fast-release  structures, it is simple to dismantle & reassemble, very hassle-free to clear and disinfect 
three. Filling heads with anti-drip unit, making certain no leakage, dripping.
four. PLC manage technique, frequency conversion No filling without bottles Auto counting, with large diploma of automation.
five. Can be geared up with mixing & heating function to meet various components viscosity & filling temp.
6. Manufactured of prime-good quality stainless metal, entirely in accordance with the need of meals sanitation.
seven. Made & made on CE demands, safey in procedure & delicate in look.

CZPT data

No. Merchandise Specification
1 Ability 2000BPH
2 Filling Variety 600ml
three Precision ±0.five%
4 Electrical power 4.5KW
five Voltage 3 Section 380V 50HZ
6 Weight 1000KG
seven Dimension 1800*1800*2300MM

Principal Configuration
 

one Contact Monitor WEINVEIW ZheJiang
two PLC Mitsubishi Japan
three Sensor OPTEX Japan
4 Solenoid Valve SHAKO ZheJiang
five Cylinder AIRTAC ZheJiang
six Servo motor CZPT Japan
seven Frequency Converter Schneider France
8 Button Schneider France
nine Relay Omron Japan
ten CZPTic switch AIRTAC ZheJiang

 

 

CZPT listing
CZPT oil filling machine– vacuum capping  machine– labeling device

Photos

Capping equipment

Labeling machine

Our Generation

Labelong concentrate on filling, packing & water treatment method area, our manufacturing facility normally takes up 60000 square meters ,much more than thirty Professinal Tehchnicians and personnel which is one particular of the expert & reliable Chinese producers & provider for liquid & semi-liquid filling & packaging equipment, blow molding machines and drinking water treatment method systems with reputable top quality & pretty good soon after sale provider with CE certification & ISO9000:2001 certification. 
 
 

No. Production line class Capacity
1 Scorching filling manufacturing line 3,000-36,000BPH
two Beverage processing Method 1,000 Ltrs/H to ten,000 Ltrs/H
three CZPTd water manufacturing line three,000-36,000BPH
four 5L Huge potential bottled drinking water manufacturing line seven-hundred-five,000b/h
5 CZPTated drink generation line 3,000-eighteen,000b/h
6 Pulp juice manufacturing line 5,000-22,000BPH
7 Oil Filling line 3,000-10,000BPH
8 Linear Filling device 300-900BPH
nine Bottlle Unscrambler Up to 20,000BPH
10 Barrelled drinking water production line three hundred-2000 bucket/H
eleven Water Treatment system 1,000 Ltrs/H to 10,000 Ltrs/H
12 OPP Labeling device 6,000-24,000BPH
13 PVC Shrink Sleeve Labeling equipment 6,000-24,000bph
fourteen CZPT Blow molding device 1,000-seven,000BPH
fifteen Total-automated CZPT Wrapper & Shrinker  

Contact me 

Candy LIU
Tel:15715848933
 
 
 
 

 

Hot Selling Edible Cooking Oil Filling Capping Machine

Full Automatic Glass Bottle Pet Bottle Cooking Oil Filling Machine

Full Automatic Glass Bottle Pet Bottle Cooking Oil Filling Machine

Entire CZPT Glass CZPT Pet CZPT Cooking Oil Filling CZPT

Description
Our automated sauce filling equipment is suitable for vehicle place-temp or higher-temp bottling of different liquid, sauce, paste & cream, broadly utilised in foodstuff, beverages & pharmaceutics, & cosmetcis fields.

Qualities:
1.With SUS304/SUS316 injection piston pump filling, it is handy to change filling dosage correctly, with large filling precision. 
two. Material getting in touch with elements are equipped with rapid-release  structures, it is simple to dismantle & reassemble, very handy to clear and disinfect 
three. Filling heads with anti-drip unit, making sure no leakage, dripping.
four. PLC handle program, frequency conversion No filling with no bottles Vehicle counting, with high diploma of automation.
five. Can be equipped with mixing & heating operate to satisfy diverse materials viscosity & filling temp.
six. Made of best-top quality stainless metal, totally in accordance with the need of food sanitation.
7. Created & made on CE needs, safey in procedure & delicate in visual appeal.

CZPT information

No. Product Specification
1 Capability 2000BPH
2 Filling Selection 600ml
three Precision ±0.five%
four Electrical power four.5KW
five Voltage 3 Section 380V 50HZ
6 Excess weight 1000KG
seven Dimension 1800*1800*2300MM

Principal Configuration
 

1 Contact Monitor WEINVEIW ZheJiang
2 PLC Mitsubishi Japan
3 Sensor OPTEX Japan
four Solenoid Valve SHAKO ZheJiang
5 Cylinder AIRTAC ZheJiang
6 Servo motor CZPT Japan
7 Frequency Converter Schneider France
8 Button Schneider France
nine Relay Omron Japan
ten CZPTic change AIRTAC ZheJiang

 

 

CZPT checklist
CZPT oil filling equipment– vacuum capping  machine– labeling device

Photo


 

Our Production

Labelong concentrate on filling, packing & water therapy field, our manufacturing unit normally takes up 60000 square meters ,a lot more than 30 Professinal Tehchnicians and employees which is one of the specialist & reliable Chinese manufacturers & provider for liquid & semi-liquid filling & packaging equipment, blow molding equipment and h2o treatment method methods with reliable high quality & pretty good right after sale services with CE certification & ISO9000:2001 certification. 
 
 

No. Manufacturing line classification Capacity
1 Hot filling manufacturing line 3,000-36,000BPH
2 Beverage processing Technique one,000 Ltrs/H to 10,000 Ltrs/H
three CZPTd drinking water generation line three,000-36,000BPH
4 5L Massive capability bottled water production line 700-5,000b/h
5 CZPTated consume production line three,000-eighteen,000b/h
six Pulp juice generation line five,000-22,000BPH
seven Oil Filling line 3,000-10,000BPH
eight Linear Filling equipment three hundred-900BPH
nine Bottlle Unscrambler Up to 20,000BPH
ten Barrelled drinking water manufacturing line three hundred-2000 bucket/H
11 Water Treatment method system one,000 Ltrs/H to 10,000 Ltrs/H
12 OPP Labeling equipment six,000-24,000BPH
thirteen PVC Shrink Sleeve Labeling device 6,000-24,000bph
fourteen CZPT Blow molding device one,000-seven,000BPH
15 Entire-automated CZPT Wrapper & Shrinker  

Contact me 

 

 

Full Automatic Glass Bottle Pet Bottle Cooking Oil Filling Machine

Fully Automatic Linear Type Piston Oil Cooking Oil Vegetable Oil Detergent Shampoo Filling Labeling Packaging Machine Line with Reliable Quality for Sale

Fully Automatic Linear Type Piston Oil Cooking Oil Vegetable Oil Detergent Shampoo Filling Labeling Packaging Machine Line with Reliable Quality for Sale

Entirely CZPT Linear Sort Piston Oil Cooking Oil Vegetable Oil Detergent Shampoo Filling Labeling CZPT CZPT/Line with Reliable CZPT for Sale

This machine is ideal for all sorts of viscous, non-viscous and corrosive liquids and many others. It is commonly used in plant oils,
engine oils, chemical liquids, everyday chemical liquids and many others. This tools is mechatronics. It is really convenient to
exchange bottle samples or liquids. exclusive design and style and outstanding functionality. It meets all requirements of clients.
Siemens PLC handle technique, with handle defense operate, vacuum leak-proof device, to guarantee no leaking scenario
throughout generation, electric adjusting for volume technique, frequency conversion manage and photoelectric management with
German TURCK brand name.
Feeding conveyor:
1 very easily to modify the bottle condition
two. Increase the velocity
three. Hook up the bottle feeding element
four. Could include the bottle halting system
five. Air conveyor for the plastic bottle, screw conveyor for the glass bottle 
Filling parts
one. No bottle no filling
2. Identical filling stage of all the bottles, adjustable filling level 
three.Filling precision ≤±2mm
four. Vacuum filling strategy
5. No dropping 
Capping part 
1.PCO ,plastic cap, steel cap, aluminum cap
2.no bottle no capping
three.two sensor to check out, PLC control
4.no total no capping
5. Spot & capping system, electromagnetic capping heads, with stress discharge operate, make sure minimal bottle crash throughout capping
six. All 304stainless metal development
7. CZPT stop when absence of bottle
eight. CZPT caps arranging and feeding, lack of caps automated feeding
Lamp checker 
Clearly to see the loaded bottle
Vacuum tank and pump 
Since the liquid contains the foam , so not only the valve has the degas characteristic, we also need to have the in shape the vacuum pump and tank, to suck all the foam from the liquid ,  and deliver to the vacuum tank by way of the vacuum pump
CZPTtrical apparatus 
PLC/ transducer/ contact display screen: siemens
Contactor/ air swap/ stabilized voltage source: Schneider
Photo electrical energy/ proximity switch: Atonics
Cylinder: Air tack

Filling heads 4 6 eight ten 12 16
Potential(1L/bottle/h) 600-1200 a thousand-1600 1600-2200 2200-2800 2800-3200 3200-4000
Filling quantity(ml) two hundred-one thousand/ 500-3000/one thousand-5000
Filling tolerance ±0.5%
Gas strain(Mpa) .fifty five-.8Mpa
Gas usage(Mpa) .eight 1 one.two 1.4 one.6 one.8
Motor energy(kw) 1 1.2 one.4 1.six 1.six one.8

Fully Automatic Linear Type Piston Oil Cooking Oil Vegetable Oil Detergent Shampoo Filling Labeling Packaging Machine Line with Reliable Quality for Sale