Tag Archives: fiber machine

Usun Brand Model: AB08T 30-60 Bar High Pressure Pneumatic Booster Pump for Fiber Laser Machine

Usun Brand Model: AB08T 30-60 Bar High Pressure Pneumatic Booster Pump for Fiber Laser Machine

 CZPT  Design :AB08T  8:one ratio  30-60  Bar  160mm driven  high pressure  pneumatic

booster pump for fiber laser machine


CZPT Details for high strain pneumatic booster pump 

 Our CZPT Air Amplifiers are pneumatically driven reciprocating piston/plunger pumps


and are ratio devices  that utilise low pressure compressed air driving a larger diameter


 piston (area x pressure), which is linearly connected to a smaller air piston.


 1.  AIR Travel Area

The air drive area is composed of a light-weight bodyweight piston complete with seals managing within an


aluminum barrel. The diameter of the air piston is 100mm. When compressed air is provided to


the pump the air pushes the air piston down on a compression stroke


 Under the control of pilot pins (poppet valve) triggered at every stop of the stroke


Crucial features

1 )  stainless metal wetted supplies of design

two)  Specialised development materials accessible

3) PTFE pressure seals as CZPT

4) Separation in between gas & pneumatic seals

five) No airline lubrication needed

6) 120mm stroke minimizes cycle price & raises lifestyle

seven) Suitable for most dangerous regions

eight) Accessible as a total packaged system 

Primary technical information  

Typical complex info for higher strain pneumatic booster screening pump  

Primary specialized parameter
Design Stress ratio Bare minimum inlet stress PI(Bar) Greatest Outlet strain PO(Bar) Outlet pressure system PO Inlet port size Outlet porst size Greatest Flow price L/min= 7 Bar
AB02 2:01 one sixteen 2PA PT3/8” PT3/8” 513@PI=seven
AB03 3:01 one 24 3PA PT3/8” PT3/8” 420@PI=7
4AB02 two:01 one 16 2PA PT1/2” PT1/2” 1450@PI=seven
AB04 4:01 1.seven 32 4PA PT3/8” PT3/8” 382@PI=7
AB05T 5:01 1.7 41.five 5PA+PI PT1/2′ PT1/2” 710@pi=seven
AB07 7:01 3.4 56 7PA PT3/8” PT3/8” 274@PI=seven
AB08T eight:01 three.four 67.4 8PA+ PI PT3/8” PT3/8” 482@pi=seven
AB10 10:01 3.4 eighty 10PA PT3/8” PT3/8′ 225@PI=7
AB15 fifteen:01 8.one a hundred and twenty 15PA PT3/8” PT3/8′ 185@PI=seven

Remark one) Maxium outlet force are at an air pushed stress of eight bar or 116 PSI ,for long existence making use of

of such pump ,we recommend that air pushed stress should be not a lot more than 8 Bar  .

Standard application of this sort of large strain air  booster screening pump  


To decide on the proper amplifier for your software you will want to 

know the  adhering to parameters:

The offered air pressure & volume

The preferred stress and circulation fee

If you are uncertain of these parameters but know a competitor brand’s model variety,

 use the air amplifier product comparison desk under to assist you select the

 right CZPT  air amplifier.


























Usun Brand Model: AB08T 30-60 Bar High Pressure Pneumatic Booster Pump for Fiber Laser Machine

Used Dark PET Fiber Plastic granules pellet making machine for sale

Used Dark PET Fiber Plastic granules   pellet making machine for sale

This device is main employed to squander fiber recycling pelletizing .it inlucde PSF,polyester yarn,Frabic,non woven frabic,textile and so forth.
Right after pelletizing equipment, squander fiber will trun into 3mm granules.the granules can utilised to producing new fiber,new carpet,new cloth and so on.

PET Fiber recycling pelletizing layout :
one.Conveyor belt—–feeding substance
2.T-Seris Crusher machine—— crushing waste fiber into little measurement
3.Transfer Silo—-Buffer and storage substance just before into pelletizing machine
4.Conveyor belt——Feeding material 
5.Pressure Compactor feeder—-waste fiber Compaction
6.CZPT extruder device with Roots Vacuum pump—–plastify squander fiber ,remover dampness and many others.
7.CPF Collection monitor filter machine—-With big area to filter soiled substance
eight.CZPT metal water cooling tank—–cooling spaghetti
nine.Pelletizer cutter–slicing spaghetti into 3mm granules
ten.Vibrator monitor equipment—-CZPT and remover defective granules 
eleven.Air conveyor & Silo—– storage granules

Pelletizing line machine parameter:

Product CZPT Diameter CZPT L/D Main Motor Electrical power Capability
PSF-SJ100 100mm 25-35:1 75KW 200-300kg/hr
PSF-SJ130 130mm 25-35:1 90-110KW 300-400kg/hr
PSF-SJ150 150mm twenty five-35:one 110-132KW four hundred-500kg/hr
PSF-SJ160 160mm twenty five-35:1 132-160KW 600-800kg/hr
PSF-SJ180 180mm twenty five-35:1 one hundred sixty-200KW 800-1000kg/hr
PSF-SJ200 200mm 25-35:1 185-225KW        —

Peleltizing line pictures for reference



Transportation and Packing
• For the free cargo we will packing by wooden box
• For the entire container loading we are packing the device by film and some on pallet appropriately
• We can ship the merchandise by air or by sea
• We will send out images of cargo loading to our client to verify and keep recording
• We can ship cargo to client’s warehouse to loading

Our service:
• Pre-sale: we give our shopper the in depth technician offer you, indicator the sales contract and so on.
• In-income: we source the specifics structure, installation instruction, and technician assist for the customers.
• Soon after income: we set up engineer to install the machine and train the staff for our client.
• We have 24 hrs service line to remedy the right after income difficulty.
• We have free spare areas with the device.
• We offer extended time period spare parts for every single customer.
• We usually update the new technologies to each client

In purchase to match your need and offer you a proper quotation, you should advise:
• What substance do you want to recycling? 
• What potential(kg/h) do you want?
• Other special needs contain Voltage ,Ampere,delivery and so on.

If you are interested in our pelletizing device, please do not wait to speak to me!

Used Dark PET Fiber Plastic granules   pellet making machine for sale

New Carbon Fiber Products Manufacturing Machine

New Carbon Fiber Products Manufacturing Machine

New design and style with single motor for carbon fiber goods device, with solitary pump and up-down design open mould, high precision, total computerized, quick speed hydraulic machine.

HangZhou City CZPT machinery Co., Ltd
CZPT device, silicone content molding equipment, injection device, rubber machinery producers / suppliers in China, supplying high-precision rubber injection molding device, rubber & silicone pressing machine, total automated large pace molding push and so on.

CZPT major attribute:

1. Compact construction, functioning top underneath 900MM

two. It is easy to employ the automation options

three. The heating gadget, unidirectional casting warmth, no heat transfer reduction, heated to a hundred and eighty ºC within five min.

four. With mechanical locking units, light curtains, protected procedure

Relevant items:
Applied to carbon fiber items

CZPT main areas:
Undertake international imported, this sort of as Japan Mitsubishi PLC management technique, Germany’s Siemens control system, ZheJiang PanelMaster HMI, Japan YUKEN oil pump, ZheJiang heating pipes, ZheJiang CZPToria solenoid valves, Denmark TRAFAG stress sensors, Japan NOK oil seal, ZheJiang Tatung motors, Omron thermostat, Germany Busch vacuum pump, Fujitsu and other international brand names equipment, secure high quality, exceptional performance, low failure fee.

HangZhou City CZPT equipment Co., Ltd is located in HangZhou metropolis, ZheJiang , China, covers an region of 28000 square meters. Our company was proven considering that 2003 and established by a team of professional engineers who are well encounter in rubber & silicone machinery production. To meet our customers’ demands, we have been adhering to style innovation, high quality 1st and also give personalized created support.

New Carbon Fiber Products Manufacturing Machine