Vapor Recovery Pump Oil-Gas Recovery Pump

Vapor Recovery Pump Oil-Gas Recovery Pump

Vapor oil and gas restoration vacuum pump Software
Vapor oil and fuel restoration vacuum pump is a comparatively consummate pump for oil-fuel restoration, operating beneath the ambient temperature at -40~60°C. It can be employed separately or as a component of oil-gasoline restoration method in fuel stations, which is primarily utilised for oil-gas restoration, to decrease air pollution and preserve energy.
With the growing necessity on using benefit of environmental pollution and vitality effectively, this Vapor oil and gas recovery vacuum pump will be applied to this field widely.

Structural Characteristic

Attribute of NP80 sequence oil-gasoline recovery vacuum pump: a shaft dived by motor is mounted on the pump entire body, and its 1 stop in the pump body is fixedly connected a crank which is jointed to a relationship rod a piston in liner with reciprocating motion is set on the top of the connection rod, and the liner is mounted in the pump physique a valve seat assay above the piston has inlet valve and outlet valve which are check valves. Besides, the inlet cavity and outlet cavity on the pump physique are related with the inlet valve and outlet valve respectively via a pipeline, the inlet cavity is linked with the coupling of an air eliminator, and one particular finish of the coupling is related with the hose by means of the hose coupling the hose with inside and external casing is related with nozzle.

 

Construction diagram:

Observe:  There are 6 electrical wires and five colours in WDVP-100

 

1)      Blue ,white ,brown  connect  380 Voltage power.

two)      There are two black electrical wires join 220 Voltage electricity.  (1 link 220 voltage power, an additional connect Zero)

3)      The yellow 1 connects Serra.

four)      The rest (blue, white, brown) needn’t link.

5)      Only two blacks handle the operate.

 

Specification

 

l Rotary vane vacuum pump

l Pump with motor, no have an effect on the fuel dispenser regular operation

l Compact dimensions, self-lubricating Efficiency

 

CZPT Specification

 Model

One PUMP Head

Double Pump Head

 Max. Circulation Rate

sixty five L/Min

120 L/Min

 Working temperature

-25~+50 °C

 Max.Vacuum

.07MPa

 Motor Pace

2800RPM

 Motor Energy

370W

 Power CZPT

380V/50Hz or 220V/50Hz

 Noise

≤70dB

 Connection

one/4″

3/eight”

Attributes

 

Simple set up and servicing: get rid of the four screws to get rid of the pump head for simple installation and maintenance High vacuum stage assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & one phase two power source, risk-free and efficient. Handles twelve fueling positions with 6 nozzles in simultaneous total movement procedure. Low noise, sluggish temperature increase.

 

1) Powerful applicability: a little and strong composition, the pump head can be set up at several angles, offering much more comfort for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.

2) Lower sounds design: sound does not exceed 62 decibels.

three) Service lifestyle: After stringent lifestyle and security take a look at, the provider lifestyle is ≥60000 hrs.

four) CZPT safety steps: The fire escape valve is outfitted with inlet and outlet ports.

 

Package deal Data

   Each Vacuum pump fixed by foaming,then in a carton.

 

Product

Size 1.026

N.W(kg)

G.W(kg)

Voltage

Single/Double

380V

One

365*275*245

twelve.32

thirteen.05

 

Double

490*275*245

fourteen.22

14.ninety five

220V

Solitary

430*275*245

14.32

15.05

 

Double

525*275*245

16.22

16.ninety five

 

Vapor Recovery Pump Oil-Gas Recovery Pump